Projets de référence
The customer is producing aerosol cans.
The cans can only be pierced after a pressure test. The punches dive through the upper opening into the can and make the piercing at the bottom simultaneously. The approach – power stroke combination of the TOX®-Powerpackage provides the short cycle time at a total stroke of 300 mm. Additionally, 3 different types of cans can be pierced with 2 tool sets.
TOX®-C-Frame Press CMM 008
Drive: TOX®-Powerpackage S 008 with press force 80 kN (at 6 bar air pressure), total stroke 400 mm and power stroke 12 mm.
The cans are transported from a feeder to the indexing table which positions two pieces in the piercing tool.
Contact FR: +33 1 60100862 Formulaire de contact |
Cookie Information Afin de présenter de manière optimale les contenus de notre site Internet, nous utilisons des cookies. Vous pouvez empêcher l'installation de cookies ou les réguler dans les paramètres de votre navigateur. |
![[Translate to France:] Punching a round hole into a can](/assets/countries/DE/images/55_15_aerosol-can.jpg "[Translate to France:] Punching a round hole into a can")
![[Translate to France:] TOX®-Press type CMM 008](/assets/countries/DE/images/55_15_CMM008.jpg "[Translate to France:] TOX®-Press type CMM 008")
![[Translate to France:] The punching tools](/assets/countries/DE/images/tia_55_15_CMM_detail.jpg "[Translate to France:] The punching tools")